Skip to product information
1 of 22

ollig好物分享

KLCB Glass Polishing Agent | Automotive Glass Oil Film Remover, Coating, and Wax Residue Cleaner

KLCB Glass Polishing Agent | Automotive Glass Oil Film Remover, Coating, and Wax Residue Cleaner

Regular price $450.00 TWD
Regular price $600.00 TWD Sale price $450.00 TWD
Sale Sold out
Specification
Quantity

Product Information

• Model: A14 Glass Polish

• Main Purpose: Removes stubborn oil film, coating residue, wax residue, water stains/spots from car glass, and can repair minor glass scratches.

• Specification: Bottle capacity approx. 150ml (may vary slightly between sets)

• Set Contents: A14 Glass Polish ×1, Upgraded Oil Film Sponge ×1, Concentrated Glass Cleaner 30ml ×2 (promotional gift)

• Scope of Application: All automotive glass materials such as car windshields, car windows, rearview mirrors, etc.

• Key Ingredients: Cerium oxide abrasive formula, with 12000-mesh ultra-fine abrasive particles

 

Core Highlights

1. Efficient cleaning, gentle on glass

Utilizes cerium oxide + ultra-fine abrasive particle formula, which gently breaks down stubborn oil film, coating residue, and water spots, while preventing scratches to the glass. After application, the glass surface is smooth and frictionless.

2. Simple operation, zero-threshold DIY

Comes with a dedicated oil film sponge. Simply apply the agent and start polishing. No special tools required, even beginners can easily get started and perform deep glass cleaning at home.

3. Significantly improved visibility in rain

After removing the oil film, it significantly enhances the water repellency and light transmittance of the glass, providing clearer visibility when driving in the rain, reducing wiper chatter and blurring, and improving driving safety.

 

How to Use

1. Preparation: Rinse the car glass thoroughly with clean water, wipe the surface dry to avoid dust particles scratching the glass; at the same time, wet the included oil film sponge with water and wring it dry.

2. Agent Preparation: Open the cap, use the pointed tip to puncture the anti-leak foil seal and install it. Shake the bottle evenly, then squeeze an appropriate amount of agent onto the white working surface of the oil film sponge.

3. Application and Wiping: Wipe evenly on the glass surface in a circular or linear motion. Focus on areas with severe oil film and water spots, wiping repeatedly until the agent no longer spreads and the glass surface becomes smooth and frictionless.

4. Rinsing: After wiping, thoroughly rinse off any remaining agent from the glass surface with clean water, then wipe dry with a clean cloth.

5. Subsequent Maintenance (Optional): Can be used with the included concentrated glass cleaner to enhance the water-repellent effect of the glass and prolong the duration of the cleaning effect.

 

Real User Reviews

• "Before, the glass was always foggy when driving in the rain. After using this, the wipers cleaned super well, and there's no glare when driving at night. The effect is really obvious!"

• "It's very easy to use, just squeeze a bit and wipe for a few minutes. The oil film sponge is also very good, it doesn't scratch the glass, and it's much more cost-effective than getting oil film cleaning done at car washes."

• "The concentrated glass cleaner that came with it is also very good. After cleaning the oil film and adding the glass cleaner, the glass doesn't accumulate water in the rain, and visibility is super clear. It's very reassuring to use for road trips."

 

Precautions

1. Application Environment: It is recommended to apply in a cool, well-ventilated area, avoiding direct sunlight or high temperatures, to prevent the agent from drying out too quickly and affecting the results.

2. Safety Protection: It is recommended to wear gloves during application to prevent the agent from coming into contact with skin; if it accidentally gets into the eyes, rinse immediately with plenty of water and seek medical attention.

3. Avoid Over-application: Simply wipe until the glass surface is smooth and frictionless. Excessive force or repeated wiping may lead to uneven gloss on the glass.

4. Avoid Other Materials: For use on glass surfaces only. Do not use on plastic, rubber, chrome parts, or tinted glass to avoid damage.

5. Storage: Store in a cool, dry place, away from children and sources of ignition. Avoid high temperatures and freezing conditions.

6. Effect Maintenance: After cleaning, it is recommended to recheck regularly (approximately every 1-2 months) to prevent oil film from accumulating again. Using it with a glass coating product can extend the maintenance cycle.

 

Video Link 🔗 (Copy to open)

https://www.instagram.com/reel/DXYrWJyk3fA/?igsh=dGsyNWY5NXN5dmRu

View full details